A couple months back, I was contacted by a Division 1 soccer player from UW-Green Bay named Just Andreas Salvesen. Just had seen my work and wanted to know if I’d be willing to put together a photoshoot with him as the subject. I jumped right on board and got the ball rolling to put the shoot together. One of the biggest obstacles we faced was the changing weather. It started getting really cold in the last weeks of October forcing us to shoot in a studio environment. From a lighting standpoint, I liked this idea because I could easily control the way I wanted to light the shots easier in the studio. The environment was the biggest challenge. Aside from portrait style shots, Just also wanted some action shots. Well since soccer is played on grass and the studio we were shooting in didn’t have a grass floor, I needed to figure out a way to get grass. Luckily while I was shopping at my local home improvement store I happened to walk into the carpet section and found my solution. They happened to have a 9×12 foot remnant piece of fake turf. Bingo, I found the solution. The fake turf was the good stuff too, the kind that is hard to distinguish in a photo if it’s real or not. Once we had all the elements in place we did the shoot. I decided to shoot the action shots on a black background because I wanted Just to really pop out as the main element in the photos. After we got the action stuff out of the way we finished up the shoot with some nice portraits. All in all, Just and I were both happy with the results. Thanks for looking. Matt
Tag Archives: lighting
X-C Skiing Shoot With The Fujifilm X100s.
Two of my favorite features of the Fuji X100s have to be the leaf shutter and built in ND filter. For anyone who works with strobes, these are two unbelievably useful features to have in a camera. If you aren’t familiar, ND filters reduce the amount of light entering the lens/camera. With out getting too technical, this is useful when you are shooting in bright light for example and you want to use a wider aperture. Without an ND filter, this is especially difficult to achieve if you are also trying to shoot with strobes in that same environment. When shooting with strobes, most cameras have a limited maximum shutter speed you can shoot with. Shooting faster than this shutter speed will result in the physical shutter of the camera showing up in the photo, cutting off some of the light produced by the strobe. This isn’t an issue with a camera that uses a leaf shutter as opposed to a focal-plane shutter. Leaf shutters allow you to sync a strobe at pretty much any shutter speed. The only limitation then becomes the speed of what you are using to trigger the strobes with from your camera, as well as the flash duration of your strobes.
This past week I set off to shoot a shot I have had in my head ever since I got the camera. I wanted to shoot a sunset cross-country skiing action shot lit with strobes. The X100s was the perfect camera to help me get the shot. I asked Phil Anschutz, a division 1 college skier, if he would help me out. He was onboard so we set out to shoot.
Canon 5d mk III 85mm 1/200 f5.6 iso 50
When we got to the location, the sun wasn’t quite as low in the sky as I wanted it, so we started by shooting a lit portrait. I shot the portrait with my Canon 5d mk III and an 85mm lens. I had to shoot with a –3 stop ND filter to be able to knock down the ambient light and shoot at a wider aperture. I lit the shot with Elinchrom strobes. The main light was a beauty dish set above camera in front of Phil. I then used two more strobes with high performance reflectors behind Phil on each side, rim lighting him.
Fuji X100s 23mm 1/500 f11 iso 200
After we had gotten the portrait shot, we moved on to shooting the action shot. I called upon the abilities of the X100s for this picture. I eyed up my shot and lit it very similar to the portrait. Beauty dish for a fill just left of camera with two strobes with high performance reflectors rim lighting Phil as he skied. The tough part was timing not only when Phil was in the light “sweet spot,” but also him making sure he was in a good looking physical position as he skied past the lights. The camera’s leaf shutter allowed me to sync my strobes at 1/500s, helping me to knock down some ambient light but also making sure I didn’t get any ghosting as my strobes froze the action. The set up worked flawlessly, helping me get the exact shot I was hoping for.
In my opinion these are some pretty powerful features to have in a compact camera that costs only around $1,200. This is just another reason why my X100s is one of my favorite cameras.
Cyclist Portrait: Studio Photography With Neutral Density Filters
A couple of weeks ago, my friend and fellow photographer, Matt Becker, helped me shoot some new work for my portfolio. I wanted to create a composite photograph of a cyclist (Coming Soon) and Matt was the perfect subject. Lets just say he puts quite a few miles on his bike each year. After we had finished shooting the frames that will be used for the composite, I wanted to shoot a quick portrait.
Canon 5d Mark III – 1/160 f1.8 3-stop ND filter
I used a three light set up consisting of two Elinchrom 600 Rxs with Creative Light 1×4’ strip boxes and an Elinchrom 500 BXRI with a Creative Light 5’ Octa.
The strip boxes were placed on each side and slightly behind Matt, creating a highlight on each side of his face. The octa was boomed above and slightly in front of Matt. Matt held a white reflector about stomach hight to help bounce some fill light under his chin. I really wanted to isolate his eyes in the shot so I put a 0.9 (3 Stop) ND filter on the lens allowing me to open up my Canon 85mm to its fastest aperture which is f1.8. This is a great way to make the eyes pop. After a few tweaks of the power of the lights, we shot away and ended up with a pretty cool simple portrait. Thanks for looking.